Solar panel installation has increased significantly to avoid skyrocketing energy bills. Rather than this fact, solar panels are also helpful in green energy initiatives. They are eco-friendly in generating electricity. Their installation must be very careful so that they can be cost-effective and provide more efficiency to the users. For that purpose, it is must to consider the energy usage of the house, the types of solar panels, and the required solar system size.
Crucial Steps to Consider Before Solar Panel Installation — A Comprehensive Guide for You:
Are you considering reducing your energy bills with solar panel installation? Do you need a complete guide? No problem. Grab your seat to get complete assistance from us.
According to the LinkedIn blog report with the title “Harnessing The Power of Solar Energy: Unlocking the Benefits of Solar Energy”, A solar system can reduce your energy bills up to 50%. |
Here are some key factors to consider before the solar panel installation:
Itemize Equipment and Analyze Your Energy Bills:
First of all, you have to look for the items that use electricity in your house. Make a list for them and their usage hours, and energy consumption. If you are going to add some more electronic items to your house, also include them because they will also consume energy. Then, analyze your monthly energy bills that how many kWhs are used in your house.
Determine Your Solar System Size and Make The Budget:
After finalizing the energy consumption, finalize the solar system required for your house. Now, it’s time to consider the budget regarding your house needs. Include the cost of all of the items like batteries, wires, earthing cables, solar panels, and mounting structure. It is crucial to finalize the cost of the solar system for your house.
Choose the Solar Panel Supplier:
Have you seen multiple designs in solar panels? Are they all from the same manufacturer? Solar panel design also affects the efficiency of energy. These designs are to enhance energy efficiency, and multiple solar panel manufacturers have their own solar panel designs according to their research.
According to RatedPower, Monocrystalline panels offer the highest efficiency, reaching 18% to 24%. |
Visit the market and check the rates of solar panel suppliers. So, be careful while choosing the manufacturer and supplier.
Step-by-Step Guide to Installing Solar Panels :
Have you ever wondered about the best steps to install the solar panels? Do you think solar panels should be installed ordinarily?
If not, no worries, we are here to assist you with a step-by-step guide. If you think that solar panels should be installed ordinarily, you might be wrong. Solar panels should be installed in the proper way to enhance their efficiency and safety measures.
Here is the step-by-step guide for you:
Installation of Solar Mounting Structure and Mounting the Solar Panels:
While installing the solar mounting structure, ensure to have a gap of 100mm to 160mm between them. Install the mounting structure tilted at 15 to 20 degrees to maximize the sunlight exposure. Each solar panel should be fixed on the mounting structure using steel nuts and bolts.
According to the IntegrateSun blog report with the title “How does Seasonal Tilt Affect Solar Panel Efficiency”, Tilted solar panels with an angle of 30 degrees produce 14% more energy than the flat ones. |
The mounting structure is different for roof types:
- For Sloped Roofs:
For sloped roofs, a railed system is used. The railed system is attached to the roof to hold the solar panels tightly on it, tightened by using steel nuts and bolts.
- For Flat Roofs:
For flat roofs, a ballast system or concrete blocks are used to hold the solar panels. A ballasted system is used to hold the solar panels with the system’s weight.
Wiring and Interconnection of Solar Panels and Inverter:
Electrical codes are used for wiring solar panels. For the interconnection of solar panels, MC4 connectors are used. Solar panels can be connected in two ways:
- Series Connection:
In a series connection, the positive (+) wire of the PV module is connected to the negative (-) module to enhance the voltages for the battery bank, but the current remains the same.
- Parallel Connection:
In parallel connection, solar panel connections are made in positive (+) to positive (+) and negative (-) to negative (-) ends. It enhances the current, but the voltage remains the same.
After the connection of solar panels, all the wiring is connected to the inverter and batteries. Positive end is connected to positive terminal and negative end to negative terminal to avoid the short circuits. The solar system can be connected to batteries to avoid an electricity shortage.
A Crucial Safety Measure: Earthing
Earthing or grounding is the last but crucial part of solar panel installation. In this method, after completing all the connections, one of the connections linked to solar panels is connected to the earth by using copper wire. It helps to ground the fault currents and lightning strikes. It is highly beneficial to avoid all of the hazards related to electricity.
Conclusion:
To sum up, solar panels help to reduce energy bills. It is a one-time investment that lasts for many years. But, its perfect installation according to the user’s need is very important. Always ensure the safety measures, like earthing, after the installation of solar panels. Choose the solar panels wisely that are perfect and hold the latest technology.
FAQs:
Can solar panel installation be effective for you?
Yes, solar panel installation can be very effective in reducing your energy bills. It is a one-time investment that lasts for years.
Is solar panel maintenance essential?
Yes, it is essential to keep your solar panels clean to enhance energy efficiency. For this purpose, occasionally remove the dust and debris from your solar panels.
What is solar panel repairing?
Solar panel repair is done in certain conditions if they are cracked or broken for some reason. So, hire a professional for that purpose.
Is the solar panel inspection necessary?
Yes, it is. Ensure to inspect your solar panels often for debris cleaning, replace a panel that is cracked, and fix any electrical circuits if they have any issues.
Is it crucial to do earthing in solar panel installation?
Yes, it is crucial. It grounds the fault currents to minimize the risks of high damages and lightning strikes from the clouds to save your house.